LIJIE L10 Series IP67 Waterproof LED Power Supply

The LIJIE L10 Series is an IP67 waterproof LED power supply designed for outdoor and moisture-prone LED lighting applications. It accepts AC 100–240V input and is available in 12V, 24V or 48V output versions, with power options ranging from 60W to 400W.

Its sealed aluminum housing makes the L10 Series suitable for LED strip lighting, gardens, landscapes, architectural decoration and other compatible low-voltage lighting systems. Buyers should confirm the exact output voltage, model number and project requirements before ordering.

What Is the LIJIE L10 Series IP67 Waterproof LED Power Supply?

The LIJIE L10 Series converts AC 100–240V input into the low-voltage DC power required by compatible LED lighting equipment. It combines a fully sealed IP67 enclosure with multiple wattage and output-voltage options for a variety of outdoor projects.

Available versions include DC 12V, 24V and 48V outputs, while the power range covers 60W, 100W, 200W, 300W and 400W. This selection allows lighting manufacturers, contractors and distributors to source a power supply according to the operating voltage and total load of their LED system.

The product literature also describes a two-stage design without visible flicker, stable high-power performance, lightning and surge protection, high efficiency and low harmonic distortion. Exact efficiency, THD and surge-protection values should be confirmed with the manufacturer before these specifications are used for engineering or compliance decisions.

Key Features and Customer Benefits

IP67 sealed enclosure

The IP67 rating indicates a dust-tight enclosure with tested protection against temporary water exposure under defined conditions. This construction is useful for outdoor and moisture-prone locations where an unsealed indoor power supply would not be appropriate.

IP67 does not mean that the power supply should be installed for permanent underwater operation. Installation must follow the manufacturer’s instructions and applicable local electrical requirements.

Wide AC input range

An AC 100–240V input range helps the L10 Series accommodate the mains voltage used across many international markets. Buyers must still confirm local electrical standards, plug or wiring requirements and certification applicability before installation.

Multiple voltage and wattage options

The series is available in 12V, 24V and 48V versions, with output powers from 60W to 400W. This range supports both smaller decorative lighting installations and higher-load outdoor lighting systems.

The selected output voltage must match the rated input voltage of the connected LEDs. A 24V LED strip, for example, should be paired with the corresponding 24V power supply version—not a 12V or 48V version.

Aluminum housing

The aluminum enclosure provides a durable structure and assists with heat dissipation. Actual thermal performance depends on the selected model, load, ambient temperature, mounting position and surrounding ventilation.

Protection-focused design

The available product information describes built-in lightning and surge protection intended to improve reliability in demanding lighting environments. Because no tested surge rating has been provided, buyers should request the relevant technical data before specifying the product for a project.

Certification coverage

The supplied product literature displays CCC, TÜV, CE, CB, KC and RoHS marks. Buyers should request the applicable certificates and confirm that each document covers the exact voltage, wattage and model being purchased.

Product Specifications

*12V, 24V and 48V versions are available. Buyers should confirm the exact output voltage and model number before ordering. Dimensions should also be checked against the latest technical datasheet.

[Download Technical Datasheet]

Is the LIJIE L10 Series Suitable for Outdoor Use?

Yes. The IP67 sealed enclosure is designed for outdoor and moisture-prone LED lighting applications, including landscape, garden and architectural lighting.

However, successful outdoor use depends on more than the enclosure rating. Installers should protect cable connections, provide suitable drainage and ventilation, avoid locations subject to permanent immersion, and follow local electrical codes. The specified operating temperature and required installation clearances should be obtained from LIJIE before installation.

[Add a real outdoor lighting project example here]

[Add verified waterproof or load test information here]

Which Output Voltage Should You Choose: 12V, 24V or 48V?

Choose the output voltage that exactly matches the rated voltage of the LED load. Voltage selection should be completed before wattage selection.

• Choose a 12V waterproof LED power supply for compatible 12V LED strips, signs or lighting modules.
• Choose a 24V waterproof LED power supply for LED products designed to operate at 24V.
• Choose a 48V LED power supply only when the connected lighting system specifies 48V DC input.

Do not assume one individual unit can switch among all three voltages. The L10 Series is offered in separate output-voltage versions, and buyers should verify the full model code before ordering.

How to Choose the Right Wattage

Calculate the total rated power of all LED products connected to one power supply, and then select an L10 version with sufficient capacity for the actual operating conditions.

A practical selection process is:

1. Confirm whether the LED load requires 12V, 24V or 48V DC.
2. Add the rated wattage of every LED strip, module or fixture connected to the power supply.
3. Consider cable length, voltage drop, ambient temperature, mounting conditions and expected operating time.
4. Select an appropriate 60W, 100W, 200W, 300W or 400W version with reasonable headroom.
5. Ask LIJIE or a qualified electrical engineer to review complex or high-load projects.

Do not use an arbitrary headroom percentage as a universal rule. The appropriate margin depends on the LED equipment, power supply specifications and installation environment.

Typical Applications

The L10 outdoor LED power supply can be considered for:

• Waterproof LED strip lighting
• Garden paths and landscape features
• Building outlines and façade decoration
• Outdoor signs and illuminated displays
• Home exterior decorative lighting
• Urban and municipal lighting projects
• Compatible low-voltage LED fixtures
• Indoor installations exposed to moisture or dust

Compatibility must be verified for each project, particularly the output voltage, power demand, wiring configuration and installation environment.

[LED Strip Lights]

[Outdoor Lighting Solutions]

Why Product Certifications Matter

Certification documents help B2B buyers evaluate safety, environmental and market-access requirements. The L10 product literature displays CCC, TÜV, CE, CB, KC and RoHS marks, but a logo alone should not replace document verification.

Before importing or specifying the product, request copies of the relevant certificates and check:

• Certificate holder and manufacturer name
• Exact product model or covered model series
• Input and output ratings
• Applicable standards
• Issue and expiry dates, where relevant
• Intended sales market
• Any conditions or limitations

A certificate accepted in one market may not automatically meet every requirement in another. Importers should confirm applicable regulations with their compliance team or local authority.

[View Certification Documents]

What Should Buyers Confirm Before Ordering?

Before requesting a quotation or placing an order, confirm the following details:

• Exact output voltage: 12V, 24V or 48V
• Complete model number for the required voltage
• Required output power
• Output type: constant voltage or constant current
• Wiring and cable configuration
• Operating temperature range
• Efficiency, power factor and THD values
• Surge-protection rating
• Applicable certificates for the destination market
• Warranty period
• MOQ and production lead time
• OEM or ODM availability

These details should be recorded on the quotation, specification sheet or purchase agreement to reduce the risk of receiving an unsuitable configuration.

Why Choose LIJIE?

The LIJIE L10 Series combines an IP67 sealed aluminum enclosure, AC 100–240V input and a broad selection of output voltages and power levels. These options can help B2B buyers source waterproof LED drivers for different lighting loads within one product family.

The available certification documentation and range of 60W to 400W models may also simplify preliminary product evaluation. Final selection should be based on verified technical documents, samples and project-specific testing.

[Contact LIJIE Technical Support]

Frequently Asked Questions

What is an IP67 waterproof LED power supply?

It is a power supply housed in a dust-tight enclosure with protection against temporary water exposure under defined test conditions. It converts mains AC input into the low-voltage DC power required by compatible LEDs.

Can the LIJIE L10 Series be used outdoors?

Yes. Its IP67 sealed enclosure is intended for outdoor and moisture-prone applications. Installation conditions, connections and local electrical requirements must still be considered.

Is an IP67 power supply suitable for permanent underwater use?

No. IP67 should not be interpreted as approval for continuous underwater operation. Ask the manufacturer for a specifically rated solution if permanent submersion is required.

Are 12V, 24V and 48V versions available?

Yes. The L10 Series is listed with 12V, 24V and 48V versions. Confirm the exact voltage and corresponding model code before ordering.

How do I choose the correct output voltage?

Match the power supply’s DC output voltage to the rated input voltage of the LED product. Do not connect a 12V LED load to a 24V or 48V supply.

How do I choose between 60W and 400W?

Calculate the combined wattage of the connected LED load and select a model with suitable capacity for the installation conditions. Complex projects should be reviewed by the supplier or a qualified engineer.

What certifications are available?

The provided product literature displays CCC, TÜV, CE, CB, KC and RoHS marks. Request the relevant documents and verify that they cover the exact model being purchased.

What should I confirm before placing an order?

Confirm the output voltage, wattage, full model number, output type, wiring, operating conditions, certification coverage, warranty, MOQ and lead time.

Request a Quote for the LIJIE L10 Series

The LIJIE L10 Series offers IP67 protection, AC 100–240V input and multiple voltage and wattage configurations for outdoor LED lighting projects.

Contact the LIJIE team to request pricing, samples, MOQ information, lead times, technical documents or certification files. Please include your required output voltage, total LED load, application environment and destination market so the team can help identify an appropriate version.